Topic: UPDATED Got a couple of £ to burn - what have you got that we might want to buy?

nice one,now we,ll all get to see that black beauty........  apy new year mate ,enjoyed the trip down to wales yesterday in your other extremely fast black beauty

nice one,now we,ll all get to see that black beauty........  apy new year mate ,enjoyed the trip down to wales yesterday in your other extremely fast black beauty

  Just a shame the car spent more time airborne than the vampire

 

Looking for Le Fish if anyone wants to part with one

The Bigger Splinter

83" span (just over 2.1meters)

Constructed from solid Oak, this time some European kiln dried instead of English, $$$$£££





Just don't have the time to see this project through. So Time to pass it on to some one that does.
The model is as in the pics. It requires all the holes to fit your radio, servos and battery.
The Idea with this was to have 4 servo wing, but as nothing has been cut out you can make it how you like.
It is untested but comes from a very good pedigree so should just be better.

More info from the builder. http://www.rcmf.co.uk/4um/index.php/topic,71684.0.html

yours for only £150.

Will

The Bigger Splinter

83" span (just over 2.1meters)

Constructed from solid Oak, this time some European kiln dried instead of English, $$$$£££

Just don't have the time to see this project through. So Time to pass it on to some one that does.
The model is as in the pics. It requires all the holes to fit your radio, servos and battery.
The Idea with this was to have 4 servo wing, but as nothing has been cut out you can make it how you like.
It is untested but comes from a very good pedigree so should just be better.

yours for only £150.

Really beautiful plane. I'd be on it like a shot except:

- no DS experience

- no plank experience

- no money

- no willingness to ding it, I'd have to just oil it and put it on the wall instead.

Shame. If it's still knocking around unflown in a few years when I have gained the relevant experience, I'll be back!

The Bigger Splinter

83" span (just over 2.1meters)

Constructed from solid Oak, this time some European kiln dried instead of English, $$$$£££





Just don't have the time to see this project through. So Time to pass it on to some one that does.
The model is as in the pics. It requires all the holes to fit your radio, servos and battery.
The Idea with this was to have 4 servo wing, but as nothing has been cut out you can make it how you like.
It is untested but comes from a very good pedigree so should just be better.

More info from the builder. http://www.rcmf.co.uk/4um/index.php/topic,71684.0.html

yours for only £150.

Will

Beautiful Will, but id also need to purchase £££ quids worth of engineering machinery, so not for me. :(

What does it weigh Will, as it is without any gear and nose weight.

I want it. I really, really want it. Alas, as with those that have already posted, I don't believe I have the experience or equipment to complete the project.
Gutted as I'm sure she would have loved St.Agnes!!
 

P.S. Am I correct in recalling that the original had 'bars' that bolted directly onto the servos rather than the standard servo horn and arm approach to control the ailerons / elevons? If so, do you or anyone else know where these can be obtained from, and are they any good?
 

Correct. But they were a bit bendy over 160mph.

Z

Normal linkages would be the way to go on this one..

I have here a few 35MHz receivers. They were given to me as working when I bought a 35MHz TX, but since I converted it to FRSky 2.4 straight away I've never used them, and can't test them.

Open to offers. Can get them to the Stroudish slopes and possibly Bristolish eventually, or will post at cost.

- Corona RP8D1 Synthesised 8 channel RX

- Futaba FP-R116FB 6ch RX with ch.64 crystal

- JETI Rex-7 Mini 7ch rx with ch.64 crystal

Anyone got a JW60 kit unbuilt lurking about?

Z

Hi Guys,
 
I've recently finished a new Caldera A, and cannot justify keeping my original model. As such the airframe is up for grabs. Here are the headlines:
 
- Full carbon airframe – very stiff wings and boom (same manufacturer as the model flown by Peter Kowalski)
 - No damage, other than a small crease to a tailplane tip and a little 'speckling' at the wing root where tape has been applied.
 - Originally built for Espen, and rigged out in Norway (not one of my builds)
 - Airtronics 761z in wings and MKS servos in the fuselage
 - Futaba 2.4 Ghz rx
 - LifeP04 cells
 - Yellow uppers / Pink lowers
 - Tweaked Slope Racer wing / tailplane / fuselage bags.
 
As I'm sure you know, the Caldera A is a stunning aerobatic model, and remains a competitive F3F model – even with my rusty thumbs, I placed 9th with this model at last years Welsh Open.
 
I was hit for £1050 for this model, but am looking for a quick sale, hence £750 firm.
 
Cheers
 
Greg

Caldera now sold guys - thanks for the air time.

Greg

Couple if Ds items for sale.

ive got for sale a Prospeed radar gun. Excellent working order always been kept in a padded box. Good for readings up to 320mph. Actually picks up readings than my Falcon

  £380 plus postage (prefer collection / delivery etc.

And an orange D80, very nicely built with Joe Mannors hardware kit and all the recomended servos. £950.

Adam

Tell Andy to keep it and fly it!

Tell Andy to keep it and fly it!

  it isnt Andys to keep

Might be worth giving Mike/ Craig a call about it, Adam? I know Mike's been working like a man possessed lately, so he might be ready for it.

Z

My 4ch Shultz Rx is on eBay with 50 mins to go. Get yourself a bargain for less than a fiver!!

Item no. 300647350800

Cheers

Duncan

Looking for Le Fish if anyone wants to part with one

I have a part finished one I've actually offered it to Jiberjaber but have just noticed your post.
The control surfaces are all finished but not hinged.
Fuselage is finished and Solartex covered with servos, 35 mgs (71) Rx and battery are built in.
Wing is complete with servos fitted, no tip blocks, covered with gloss white GRP reinforced tape.
Genuine kit direct from LE Models, can send you some pics if you like.

Robc2
 

I'm after a Le Fish or similar.... any out there not flying that want a new home?

Ellita F3F and Thorn 60" for sale

1)
Muller Ellita F3F model 2.85m cross tail
Just need to add receiver to fly (or I can throw in the 35mhz I took out if needed). It has had a fuselage repair which is strong but not very pretty as I bandaged the repair with carbon on outside and haven't painted. Also a slight crease to wing tip which is only cosmetic and minor which was done in transit. This is a very good model for sport flying as well as F3F.
more info please contact me
£400.00

2)
Thorn 60in Solid wood plane this is a heavy model for windy days comes with 2 hitec HS85mg in wing only. Good condition.
£40.00

I'm in hastings but you maybe able to pick up from an F3F event

Thanks
Gary Harrison
 
 

Photos of fus damage and wing damage?

Emailed you about the thorn Gary.

Guy's,

I'm after a hotliner type model.
Something like an electric bird or electric typhoon. 2metres or less.

Anybody got anything going?

Amazed at the responses.  I thought I was going to have to wait weeks. I've got a couple of interesting options already, need to do more research.

Any more offers?

Got a Hotliner (Graupner Speed)

Guy's,

I'm after a hotliner type model.
Something like an electric bird or electric typhoon. 2metres or less.

Anybody got anything going?

for sale...

Simprop Selection aerobatic T Tail  Hot Liner glider pm me for pics and more details

Simprop Selection aerobatic T Tail  Hot Liner glider pm me for pics and more details

  now sold   

As I said before, thanks for all the offers. I am pretty certain I've got myself sorted with an electric bird which I'm looking forward to getting my grubby mitts on.

So is anybody interested in a fairly lightly used Reichard Svist. Ready to fly except for Receiver? Offers?

Due to having just bought a new system i have some receivers for sale, all in working order, some like new, others have scratches and glue etc on them from foamies. open to offers on multiple purchases.

Spektrum AR9000 and satelite £65 posted (3 available)
Spektrum AR7600 and satelite £45 posted (2 available)
Spektrum AR8000 and satelite £50 posted


Jr PCM RS10DS 35mhz £20 each posted (3 available)


Jr PCM synth RS77S 35mhz £15 each posted (2 available)


Jr PPM synth RS70 35mhz £12 each posted (3 available)


Jr PPM R700 35mhz xtal £10 posted for both
Jr PCM R770 35mhz xtal £8 posted


Prefer Paypal

Thanks Adam.

All jr 7 ch ppm and PCM s now sold, still have the Jr 10channels and spektrum ones.

D80, Orange top, white/purple underside, Joe Manor recomended servos and linkages, 6V sub c pack, ballast, mint condition, two small holes put by aileron bays where iv removed the tip ballast, all sealed up and doesnt have any effect on performance or strength. 795 ovno

Scott  07765899272

Hi folks – anyone got a spare Ellipse 2 wing centre panel? – its a glass
version, so smaller joiners – doesnt have to be pristine, as long as its solid -
white on top would be good, red undersides ideal.

Please PM or email me if you've got anything suitable.

Phil.

Due to planetary alignment which brought together the opportunity to buy a plane off a good mate combined with a lack of cash (it always happens like that ) I need to off load a couple of airframes to supply the required wonga...

Therefore I have for sale...
1. Opus GT complete with 5 x Futaba 3150 servos
2. Air One Mini Acacia fully fitted out (can't remember what servos are in this but will check).

Photos will be uploaded later from the PC as I'm doing this post on my iPad...in depth enquiries will be supplied via pm and over the phone if you pm me your number.

I'm looking for £445 ovno for the Opus and £175 ovno for the Air One

some pics

 1/4 scale iflytailies glider pilot. £60 plus p&p.  pm me if interested. Ant.

...further to the sale of the Opus...the ONLY reason it's up for sale is that I've been given first refusal on a 'Sting' which I have coveted for some time...and is in immaculate condition...

Otherwise I'll be very happy to keep the Opus  ;T)