Topic: Scale Cowls @ Ceejays Scale Fittings inc

    cj     

  offices in stoke, arizona and peckham

who is playing Rodders   

with sales reps in Illinois ))))

hi rich

  i pm,ed you but i,ll stick on here too, i still have a cowl at 1/3 size for a pup need to check your dia for me and how long you need cowl from front to poss of cable groove 

  chris

Have you sourced the cowl yet chris??

just waiting on call from spinning firm. the pattern we have is 13 3/4 dia (is this close enough due to it being an open cowl at the bottom it will expand a little  )and we can make one over 7" deep i believe, this is the call i,m waiting for to check length, i,ll call him tommorrow if i aint heard today.

  chris

 

That will be great at 7" deep as you have said it is an open cowl if poss could you bring it to rougham
Or will this be too soon

      Thanks Rich ....

might be a bit soon as i still have to go to manufactures to get them to do me a deep one, all the ones i have are short of the required 7"

  chris

OK Chris just let me know when and i will sort out how to pick the cowl u[p
 

Thanks Rich

Hello Chris,
I was just wondering if you had any luck with the 1/3 Albi spinner? Have a great day.

Barry

i have got the pattern i,m just waiting for it to be checked for shape against a mate albertross 1/3 and i have a blank of alluminium ready to go, did you need a backplate for it !

  chris

Chris, this is what I made my drawings from, when I moulded my Alb's spinner, dim's are full size

Steve

Hello Chris,
Yes, I will need a back plate, I have a diameter of 8" by 3" deep. Thanks
again, have a great day.

Barry

Barry, 1/3rd scale would be 200mm dia

Steve

Barry, 1/3rd scale would be 200mm dia

Steve

  'bout 8 inches then

  chris

  'bout 8 inches then

  chris

Go on then, and I was trying hard to go metric 

Steve

why are you french

  chris

non

I understand the Tap is flatulant in French and this includes their dielects.     Ken

Barry material for spinner has arrived, going to try the spinner next week all being well 

  to everyone else using/wanting clevises, i have now sourced left hand threaded solder on extenders for cable so all pairs now come with right and left handed wire ends or threaded rod depends on your needs

  Chris

Sounds great Chris,
I also wanted to get with you on some 1/3 Siemen Schukert cowls, I can send you the drawings etc. if your interested. I'm going to need several. Send me a PM so I kwon how to get you the important $tuff.  Have a great day.

Barry

Yes they are deep
If you could do that it would be great
Thanks Chris   

Hi CJ has been a long time but believe it or not Arizona have delivered the cowl from when i ordered latter part of last year if you have got one made up not to worry i will still purchase from you as the one i have is not quite deep enough but it would be OK Thanks Rich....

no problem

  it does take time this end to get things spun as i get them done as and when the spinner company(sounds grand but in reality its one man in an industrial unit) has the time between jobs, and he aint done any more yet.

  chris