Topic: Speedo Thermo - anyone for Speedo MoM racing?

There is no Ply servo mount for the wing m8 , that's for the fuse servo .
        You can do it 2 ways with the wing servo m8 , you can

1.  stick the servo to the covers and screw these to the wing
or
2. Use a little 5 min epoxy on the servo in the wing where it touches the balsa , Not loads but just a small amount to secure it , then screw the covers over the top
  that's how Ive done mine and its fine .

     The ply plate is for the elevator servo mount , i put mine under the cockpit as far back as poss to leave room for the battery in front .


          Bob