Topic: G.T.M 1/3 Scale Fokker Dr1

I made some metal brackets up to mount the crank case, it is going to need lots of trimming to make it all fit

Cor thats going to go well mate 
Looking forward to seeing it flying now. You will be able to use the throttle in flight not like before 
Give us a go 
Watching the dummy motor build with interest.

Si

  Can i have a go at the pup then

  Can i have a go at the pup then

Of course mate, any time its yours to play with 

Si

Of course mate, any time its yours to play with 

Si

  Thanks Si looking forward to it

A bit more done in the workshop cut the crank case and cylinders so they fit round the engine.                                         

Starting to look the part now

Nice work mate 

Thanks Mudders , A bit more done yesterday afternoon before going to work, cut all the cylinders and fitted them to the crank case, also fiberglassed the crank case with .06oz cloth to strengthen it up                                 

Thats going to look spot on mate  It great seeing bits come to life out of lots of small bits.
I must make sure Terry looks at this as he need something similar for the E111

Si

Thanks for the comments lads . Managed to make the cylinder heads and cooling fins in between going to work.                                                                                                                                                                                                                                                                Now my dad has fully recovered and getting back into the swing of things he made one of the spark plugs what will go into the side of the cylinder

You'll need a lot of voltage to make that spark !

 

 

Looking good Niel  I have misplaced some data and am in need of the incidents of all the wings if you have this at hand it would be helpfull to me thanks Rich 

Well after a month with no computer we have been busy in the workshop, just a update on the dummy engine, its all finished now . Neil