Started by THE BLACKBIRD, September 26, 2018, 11:18:49 am
0 Members and 1 Guest are viewing this topic.
Quote from: THE BLACKBIRD on October 13, 2018, 09:34:22 amOk iv got my DLE55 running sweet now, but iv had problems with the wrap around exhaust coming loose, so this time i drilled the bolts holding it, tightened it all up good, when running it on the ground setting up the engine it stayed tight, goodho i thought cracked irWent flying with it this morning ans after one flight it was loose again how can this be, the bolts are still wired with the piano wire through them, so they have not movedwhits end
Quote from: kinverflyer on October 14, 2018, 07:50:11 amHeat will be the cause of the exhaust bolts coming loose,
Quote from: THE BLACKBIRD on October 14, 2018, 11:52:29 amIt is No, 2 Pete the metal on the silencer is being removed, and it dose stand out, now,
Quote from: THE BLACKBIRD on October 20, 2018, 07:47:41 amNow i have a real problem the plug has stripped the threads in the cylinder headapart from buying a new head and barrel as its all in one piece what else can be doneTony
Page created in 0.086 seconds with 32 queries.