Started by PDR, October 20, 2019, 10:45:49 am
0 Members and 1 Guest are viewing this topic.
Quote from: PDR on October 20, 2019, 10:45:49 amYesterday was a potentially good flying day - a bit breezy, but no rain and (more to the point) my Better Third was away for the whole day.....PDR
Quote from: PDR on October 20, 2019, 10:45:49 amSo I fetched the Tx, reconnected everything and powered up - and got the constant beeping again. This had me scratching my head, because the setup worked fine on the servo tester but refused to work from the Rx! I stared at the Tx and the penny dropped. The last time I flew it I had knocked the throttle trim up a few clicks so that the prop didn't stop when the throttle was closed on the downside of manoeuvres and while taxiing back in. This trim was far enough forward to stop the ESC arming on switch-on. I have a side-button set as a kill switch, so I was using that to shut off the throttle and to allow the ESC to arm, but I'd forgotten all about it. So there was actually nothing wrong with anything but the prat holding the Tx - if I'd set the kill switch before connecting the battery it would have worked, and I would have both had a decent day of flying AND not wasted 90 mins messing about testing stuff!DUH!!PDR
Quote from: Chippie on October 20, 2019, 11:32:07 am" better third " ?Who or what is the lesser third in this triangle? 😂
Quote from: chaz2b on October 31, 2019, 14:38:10 pmI've always claimed my aircraft failings from interference, things were going fine, till ...I.... interfered with it!Love your style of flying Peter.Chaz@2b
Page created in 0.096 seconds with 33 queries.