money
RSS Facebook

RCMF

Welcome, Guest. Please login or register.
October 24, 2017, 05:06:14 AM

Login with username, password and session length

Articles

Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
RC Flight Chatter / Re: Traplet failed
« Last post by Michael_Rolls on Today at 03:29:22 »
Me too!
Mike
2
RC Flight Chatter / Re: Traplet failed
« Last post by retflyer on Yesterday at 21:02:24 »
I have just found out today that RC Jet International has resurfaced with a new publisher. I purchased the first issue via Pocket mag for 2.99.
They are going to honour all existing subscriptions, good news just hope that was the case for RCMW.
3
Taranis Special Interest Group / Frsky X6R binding issue
« Last post by frank on Yesterday at 11:52:01 »
Hi Guys.
 Not an enormous problem , but would like to resolve it.

 Setting up stuff on my Horus X12S, I was using a Frsky S6R rx, had no problems binding it to the horus, thought I would try a similar set up on my Taranis Qx7....................... Just can't get the S6R to Bind with the QX7, both trannys are on their respective latest FCC OTX.

 As can be seen from the attached photos the only difference is the Horus has "(18ms)" after the channel 1-16.

 Done a bit of searching on this and a few people seem to be having the same prob with various Taranis Trannys, but I have not seen a fix yet.

 Any ideas ?
4
RC Model Flying Events / Re: ASHBOURNE SCALE DAY 2017
« Last post by idigbo on Yesterday at 11:26:18 »
Great pics as ever Dave :af  Makes the day knowing there's pictures to follow it up!!

Ian.
5
Hi , I need a new wing for my Opus-V or complete model if price is right.
I'm in Herefordshire

Geoff
6
UK Regional / Re: The South East Flyers Thread Part 2
« Last post by Bad Raven on October 22, 2017, 15:20:56 PM »
A while back now I inherited a Speedo and a couple of spare fuselages (as I understand the original owner used to  "replace it after every flight" . So presume Mk1 (since I know nothing about them. They have just got to the top of the pile!

Found a RCG thread but seems all on the Mk2 and I don't know the differences.  This says CG in range 65-75, Ele +/- 9 Ail +20/-10 and Spoileron +15.

Are these OK for the earlier plane?

BTW, I had a FreeBird that "lost" the motor off the front due carp fus firewall design (looked lovely finish, shame about the "paper" used""), So I'm going to use the wing from that on one Fus for a laugh!
7
Dear All
Our first indoor meeting of the season will
be held at the Stalham sports hall Norfolk
on Sunday the 5th of November 2pm until 5pm.

All types of model are welcome including hovercraft.
Snacks and drinks are available as well as a viewing area.
All welcome.

This is run on the same basis as my Tibenham events which is none profit.
It costs 60 to hire the hall for three hours, this will be divided by the pilots
present. So we need around 12 people to make it viable.

Hopefully this event will go with a bang.  :)

Regards Phil G.
8
RC Model Flying Events / Re: ASHBOURNE SCALE DAY 2017
« Last post by Mr Magoo on October 21, 2017, 21:46:49 PM »
Hi Folks
A few photo's from last sunday










The rest of sundays photo's can be seen here http://www.drcf.co.uk/scaleday2017.htm
Cheers  Dave P
9
UK Regional / Re: The South East Flyers Thread Part 2
« Last post by paul w on October 21, 2017, 17:46:15 PM »
Apropos nothing....

<a href="http://www.youtube.com/watch?v=TSFxDTLdTz8" target="_blank">http://www.youtube.com/watch?v=TSFxDTLdTz8</a>

Longer tow rope and matched rotational speeds a possible advantage?
10
RC Model Flying Events / Re: ASHBOURNE SCALE DAY 2017
« Last post by Mr Magoo on October 21, 2017, 17:33:13 PM »
Hi folks
photo's from last sunday can be seen here.
http://www.drcf.co.uk/scaleday2017.htm

Cheers  Dave P
Pages: [1] 2 3 4 5 6 ... 10
BloQcs design by Bloc
SMF 2.0.2 | SMF © 2011, Simple Machines
SMFAds for Free Forums
TinyPortal © 2005-2012
Page created in 0.281 seconds with 19 queries.