Started by Darkstar56, July 13, 2015, 18:09:11 pm
0 Members and 1 Guest are viewing this topic.
Quote from: Darkstar56 on July 15, 2015, 08:38:50 amThink I will put the servo at the bottom and use a small bellcrank that I have at the top.
Quote from: w8racer on July 15, 2015, 23:52:43 pmDo you need a bellcrank at the top? Is it possible to connect the vertical pushrod directly to the elevator and minimise any slop?
Quote from: Anthony on July 13, 2015, 20:46:20 pmHi Max, put the servo at the top or bottom, whichever fits best and have a short direct drive to the elevator, shorter the better. Fiddle around with the orientation of the servo and pushrods until it feels right and no slop. Ant.
Page created in 0.067 seconds with 27 queries.