February 27, 2021, 15:49:41 pm

RCMF Donations

Enjoy using RCMF? How about a wee donation to help us keep you in the style to which you've become accustomed?

Welcome to RCMF. Please login or sign up.

February 27, 2021, 15:49:41 pm

Login with username, password and session length

Baudis ASW 22

Started by deepeedee, October 03, 2015, 07:52:12 am

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


I have a Baudis ASW 22 on order for delivery in about 8 weeks time and the model is equipped with 8 servos in the wing [2 ailerons, 2 outer flaps mixed with the ailerons. 2 inner flaps as flaps & pop up air brakes.
All my current models [Valenta ASW 17, ASW 20 and Ventus] have 6 servos in the wing [aileron, flaps and pop up airbrakes] and I have these models set up on a Multiplex Cockpit very successfully with camber change on the left hand slider, Butterfly on the right hand slider as usual with the pop up airbrakes on a 3 position switch on channel 4 which is the throttle channel. I have to set up the airbrake servos mechanically because there is no way to independently alter the centering and end travel but this is quite simple.

Now to my question [sorry it took so long]! I was going to purchase a Multiplex Royal 16 so I could mix in all the servos on the Baudis ASW 22 and have the inner flaps as landing flaps, the outer flaps coupled with the ailerons and the pop up airbrakes on a switch BUT I find that I do not like the Multiplex Royal arrangement with the sliders inboard which I find difficult to use after many years with the Cockpit outer sliders.

I have been looking at a Futaba 14SG for this model but are there any other suggestions from members re. the Baudis ASW 22 in regards to other radio system which could fit my needs.



Jeti dc or ds16.


Jeti and Taranis are both popular at the aerotows, if you wanted to keep using your Multiplex Rx's you could buy a Taranis and fit a M Link module as some have done.

On the Royal Pro you could always assign one of the 3 position switches on the side to flap (for camber etc) and use the throttle stick for airbrakes/crow, that's what I did on mine and even though I use the slide sliders on my Profi I just use them as like a 3 position switch!