Started by Bustergrunt, July 31, 2013, 19:36:00 pm
0 Members and 1 Guest are viewing this topic.
Quote from: FrankS on July 31, 2013, 20:22:41 pmThe ones in the Pilatus are every bit as hard to fit with the supplied hardware, I reviewed the Pilatus and as per the review I changed out the rods to use a threaded rod with a conventional clevis and Z bend, the Z bend on the servo arm and clevis at the airbrake, took a little setting up to get them both deploying level but once set they stayed set unlike the original stuff which was self adjusting every time you deployed them.I've flown the Ka8 as well though, builder had similar problems with the airbrakes and had to change out the control rod, but it's do-able and they do fly really well.Pictures of my Pilatus airbrake mods below
Quote from: Bustergrunt on September 18, 2013, 17:45:09 pmOn the advice of a geezer, I added 1/16th packing to the LE of the tailplane...
Page created in 0.047 seconds with 28 queries.